dmesg - intel i5
CPU0 microcode updated early to revision 0x1a, date = 2014-05-23
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ad118fff] usable
BIOS-e820: [mem 0x00000000ad119000-0x00000000ad11ffff] ACPI NVS
BIOS-e820: [mem 0x00000000ad120000-0x00000000addeffff] usable
BIOS-e820: [mem 0x00000000addf0000-0x00000000ae312fff] reserved
BIOS-e820: [mem 0x00000000ae313000-0x00000000bdae0fff] usable
BIOS-e820: [mem 0x00000000bdae1000-0x00000000bdb47fff] reserved
BIOS-e820: [mem 0x00000000bdb48000-0x00000000bdb8dfff] usable
BIOS-e820: [mem 0x00000000bdb8e000-0x00000000bdcc4fff] ACPI NVS
BIOS-e820: [mem 0x00000000bdcc5000-0x00000000bdffefff] reserved
BIOS-e820: [mem 0x00000000bdfff000-0x00000000bdffffff] usable
BIOS-e820: [mem 0x00000000bf000000-0x00000000cf1fffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Pro4, BIOS P1.30 05/23/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FE0000000 write-back
2 base 0220000000 mask 7FF0000000 write-back
3 base 00C0000000 mask 7FC0000000 uncachable
4 base 00BF000000 mask 7FFF000000 uncachable
5 base 022FE00000 mask 7FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 512MB, type WB
reg 2, base: 8704MB, range: 256MB, type WB
reg 3, base: 3GB, range: 1GB, type UC
reg 4, base: 3056MB, range: 16MB, type UC
reg 5, base: 8958MB, range: 2MB, type UC
total RAM covered: 7918M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3056MB, range: 16MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 512MB, type WB
reg 5, base: 8704MB, range: 256MB, type WB
reg 6, base: 8958MB, range: 2MB, type UC
e820: update [mem 0xbf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8f0-0x000fd8ff] mapped at [ffff8800000fd8f0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x22fc00000-0x22fdfffff]
[mem 0x22fc00000-0x22fdfffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x22c000000-0x22fbfffff]
[mem 0x22c000000-0x22fbfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x22bffffff]
[mem 0x200000000-0x22bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xad118fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xacffffff] page 2M
[mem 0xad000000-0xad118fff] page 4k
init_memory_mapping: [mem 0xad120000-0xaddeffff]
[mem 0xad120000-0xad1fffff] page 4k
[mem 0xad200000-0xadbfffff] page 2M
[mem 0xadc00000-0xaddeffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xae313000-0xbdae0fff]
[mem 0xae313000-0xae3fffff] page 4k
[mem 0xae400000-0xbd9fffff] page 2M
[mem 0xbda00000-0xbdae0fff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xbdb48000-0xbdb8dfff]
[mem 0xbdb48000-0xbdb8dfff] page 4k
init_memory_mapping: [mem 0xbdfff000-0xbdffffff]
[mem 0xbdfff000-0xbdffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x348e8000-0x3646bfff]
ACPI: RSDP 00000000000f04a0 000024 (v02 ALASKA)
ACPI: XSDT 00000000bdc92080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bdca3058 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000bdc921a0 010EB1 (v02 ALASKA A M I 00000121 INTL 20120711)
ACPI: FACS 00000000bdcc4f80 000040
ACPI: APIC 00000000bdca3168 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000bdca31e0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000bdca3228 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bdca3768 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
ACPI: SSDT 00000000bdca42e0 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20051117)
ACPI: MCFG 00000000bdca44a8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000bdca44e8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000bdca4520 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 00000000bdca4890 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
ACPI: AAFT 00000000bdcaa3f0 0002DF (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: SSDT 00000000bdcaa6d0 000579 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
Initmem setup node 0 [mem 0x00000000-0x22fdfffff]
NODE_DATA [mem 0x22fdf7000-0x22fdfbfff]
[ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227800000-ffff88022f3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xad118fff]
node 0: [mem 0xad120000-0xaddeffff]
node 0: [mem 0xae313000-0xbdae0fff]
node 0: [mem 0xbdb48000-0xbdb8dfff]
node 0: [mem 0xbdfff000-0xbdffffff]
node 0: [mem 0x100000000-0x22fdfffff]
On node 0 totalpages: 2020250
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12056 pages used for memmap
DMA32 zone: 771582 pages, LIFO batch:31
Normal zone: 19448 pages used for memmap
Normal zone: 1244672 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xad119000-0xad11ffff]
PM: Registered nosave memory: [mem 0xaddf0000-0xae312fff]
PM: Registered nosave memory: [mem 0xbdae1000-0xbdb47fff]
PM: Registered nosave memory: [mem 0xbdb8e000-0xbdcc4fff]
PM: Registered nosave memory: [mem 0xbdcc5000-0xbdffefff]
PM: Registered nosave memory: [mem 0xbe000000-0xbeffffff]
PM: Registered nosave memory: [mem 0xbf000000-0xcf1fffff]
PM: Registered nosave memory: [mem 0xcf200000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xcf200000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88022fa00000 s86336 r8192 d24256 u524288
pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1988661
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7842692K/8081000K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 238308K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 32505856 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3298.893 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6597.78 BogoMIPS (lpj=13195572)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
CPU1 microcode updated early to revision 0x1a, date = 2014-05-23
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU2 microcode updated early to revision 0x1a, date = 2014-05-23
CPU3 microcode updated early to revision 0x1a, date = 2014-05-23
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (26391.14 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xad119000-0xad11ffff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xbdb8e000-0xbdcc4fff] (1273856 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 11:29:27, date: 10/23/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 15 blocks of module-level executable AML code
ACPI: SSDT 00000000bdb16c18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bdb16618 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bdb15d98 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-7e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xef800000-0xefbfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xefc34000-0xefc37fff 64bit]
pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xefc20000-0xefc2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xefc3e000-0xefc3e00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xefc00000-0xefc1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xefc3c000-0xefc3cfff]
pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xefc3b000-0xefc3b3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xefc30000-0xefc33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xefc3a000-0xefc3a3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xefc39000-0xefc397ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xefc38000-0xefc380ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 02-03] (subtractive decode)
pci 0000:00:1c.2: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.2: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.2: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.2: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.2: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.2: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.2: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.2: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.2: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.2: bridge window [mem 0xcf200000-0xfeafffff] (subtractive decode)
pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:02:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:02:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:02:00.0: bridge window [mem 0xcf200000-0xfeafffff] (subtractive decode)
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xad119000-0xafffffff]
e820: reserve RAM buffer [mem 0xaddf0000-0xafffffff]
e820: reserve RAM buffer [mem 0xbdae1000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdb8e000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0800-0x087f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [io 0x0290-0x029f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xeffe0000-0xeffeffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:00:1c.2: PCI bridge to [bus 02-03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:02: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:02: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:02: resource 13 [mem 0xcf200000-0xfeafffff]
pci_bus 0000:03: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:03: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:03: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:03: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:03: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:03: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:03: resource 17 [mem 0xcf200000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28176K (ffff8800348e8000 - ffff88003646c000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb9ae1000-0xbdae1000] (64MB) mapped at [ffff8800b9ae1000-ffff8800bdae0fff]
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1a
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1a
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1a
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1a
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1414063767.516:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15372
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1200x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90008e80000, using 9024k, total 9024k
Console: switching to colour frame buffer device 240x75
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xefc3b000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xefc3a000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:844:479
rtc_cmos 00:06: setting system clock to 2014-10-23 11:29:28 UTC (1414063768)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[115]: starting version 204
drm: module verification failed: signature and/or required key missing - tainting kernel
drm: module has bad taint, not creating trace events
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
i915: module has bad taint, not creating trace events
[drm] Memory usable by graphics device = 2048M
checking generic (d0000000 8d0000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
i915 0000:00:02.0: irq 41 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-1: new high-speed USB device number 2 using ehci-pci
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x75
usb 1-1: New USB device found, idVendor=8087, idProduct=8009
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:17: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xefc39000 port 0xefc39100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xefc39000 port 0xefc39180 irq 42
ata3: SATA max UDMA/133 abar m2048@0xefc39000 port 0xefc39200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xefc39000 port 0xefc39280 irq 42
ata5: DUMMY
ata6: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
usb 2-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:37:d0:b0
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
tsc: Refined TSC clocksource calibration: 3299.043 MHz
usb 2-1: New USB device found, idVendor=8087, idProduct=8001
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata3.00: ATA-9: WDC WD10JFCX-68N6GN0, 01.01A01, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata4.00: ATAPI: PIONEER DVD-RW DVR-216D, 1.07, max UDMA/66
ata2.00: configured for UDMA/133
ata4.00: configured for UDMA/66 (SET_XFERMODE skipped)
ata1.00: ATA-9: Crucial_CT256MX100SSD1, MU01, max UDMA/133
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Crucial_CT256MX1 MU01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA WDC WD10JFCX-68N 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 3-10: new full-speed USB device number 2 using xhci_hcd
scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-216D 1.07 PQ: 0 ANSI: 5
usb 3-10: New USB device found, idVendor=09da, idProduct=0080
usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-10: Product: USB Mouse
usb 3-10: Manufacturer: A4Tech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input7
hid-generic 0003:09DA:0080.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Mouse] on usb-0000:00:14.0-10/input0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg3 type 5
usb 3-13: new high-speed USB device number 3 using xhci_hcd
usb 3-13: New USB device found, idVendor=046d, idProduct=082b
usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-13: Product: Webcam C170
usb 3-13: Manufacturer:
usb 3-14: new low-speed USB device number 4 using xhci_hcd
usb 3-14: New USB device found, idVendor=04d9, idProduct=1702
usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14: Product: USB Keyboard
usb 3-14: Manufacturer:
usb 3-14: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-14: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/input/input8
hid-generic 0003:04D9:1702.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-14/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/input/input9
hid-generic 0003:04D9:1702.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-14/input1
random: nonblocking pool is initialized
Switched to clocksource tsc
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
EXT4-fs (sda5): INFO: recovery required on readonly filesystem
EXT4-fs (sda5): write access will be enabled during recovery
EXT4-fs (sda5): recovery complete
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Adding 8388604k swap on /dev/sda6. Priority:-1 extents:1 across:8388604k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[449]: starting version 204
lp: driver loaded but no devices found
w83627ehf: Found NCT6776F chip at 0x290
ppdev: user-space parallel port driver
mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
systemd-udevd[473]: renamed network interface eth0 to eth1
snd_hda_intel: unknown parameter 'vid' ignored
snd_hda_intel: unknown parameter 'pid' ignored
HDA driver get symbol successfully from i915 module
snd_hda_intel 0000:00:03.0: irq 45 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
type=1400 audit(1414056575.700:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=559 comm="apparmor_parser"
type=1400 audit(1414056575.700:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=559 comm="apparmor_parser"
type=1400 audit(1414056575.700:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=559 comm="apparmor_parser"
type=1400 audit(1414056575.700:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=559 comm="apparmor_parser"
type=1400 audit(1414056575.700:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=559 comm="apparmor_parser"
type=1400 audit(1414056575.700:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=559 comm="apparmor_parser"
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
ip_tables: (C) 2000-2006 Netfilter Core Team
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
SKU: Nid=0x1d sku_cfg=0x4035e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4035e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
type=1400 audit(1414056575.712:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=577 comm="apparmor_parser"
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
ip6_tables: (C) 2000-2006 Netfilter Core Team
device-mapper: multipath: version 1.6.0 loaded
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Webcam C170 (046d:082b)
input: Webcam C170 as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/input/input20
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usbcore: registered new interface driver snd-usb-audio
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
init: failsafe main process (1060) killed by TERM signal
init: idmapd-mounting (/media/ork_share) main process (945) killed by TERM signal
init: idmapd-mounting (/media/ork_storage) main process (946) killed by TERM signal
init: idmapd-mounting (/media/malandhir_storage) main process (951) killed by TERM signal
type=1400 audit(1414056577.708:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1194 comm="apparmor_parser"
type=1400 audit(1414056577.708:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1194 comm="apparmor_parser"
type=1400 audit(1414056577.708:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1194 comm="apparmor_parser"
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (1202) killed by HUP signal
init: cups main process ended, respawning
init: samba-ad-dc main process (1345) terminated with status 1
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Bridge firewalling registered
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (2032) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
postgres (2118): /proc/2118/oom_adj is deprecated, please use /proc/2118/oom_score_adj instead.
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
aufs 3.13-20140303
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
audit_printk_skb: 153 callbacks suppressed
type=1400 audit(1414056582.004:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="docker-default" pid=2474 comm="apparmor_parser"
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81cd9b00)
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x235 offMax=0xeae
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
cgroup: systemd-logind (1289) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root.
type=1400 audit(1414063807.926:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=4654 comm="apparmor_parser"
type=1400 audit(1414063807.926:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4654 comm="apparmor_parser"
type=1400 audit(1414063807.926:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4654 comm="apparmor_parser"
init: plymouth-stop pre-start process (4959) terminated with status 1
UDF-fs: INFO Mounting volume 'Market_Leader_Intermediate', timestamp 2009/12/03 18:45 (1078)
VFS: busy inodes on changed media or resized disk sr0
sr 3:0:0:0: [sr0] Device not ready
sr 3:0:0:0: [sr0]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 3:0:0:0: [sr0]
Sense Key : Not Ready [current]
sr 3:0:0:0: [sr0]
Add. Sense: Medium not present - tray closed
sr 3:0:0:0: [sr0] CDB:
Read(10): 28 00 00 00 01 a3 00 00 01 00
end_request: I/O error, dev sr0, sector 1676
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdc] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sdc] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
sd 1:0:0:0: [sdb] Stopping disk
serial 00:0a: disabled
serial 00:0a: System wakeup disabled by ACPI
PM: suspend of devices complete after 567.078 msecs
PM: late suspend of devices complete after 3.972 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 64.000 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 40
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
Broke affinity for irq 23
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 microcode updated early to revision 0x1a, date = 2014-05-23
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 microcode updated early to revision 0x1a, date = 2014-05-23
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 microcode updated early to revision 0x1a, date = 2014-05-23
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 101.576 msecs
PM: early resume of devices complete after 0.086 msecs
mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
serial 00:0a: activated
usb 3-13: reset high-speed USB device number 3 using xhci_hcd
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/66 (SET_XFERMODE skipped)
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021ea5f440
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sdc] Starting disk
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Starting disk
PM: resume of devices complete after 4964.120 msecs
PM: Finishing wakeup.
pci_bus 0000:03: Allocating resources
pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:02:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:02:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
pci 0000:02:00.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:02:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:02:00.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:02:00.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
pci 0000:02:00.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
pci 0000:02:00.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0x2000-0x2fff]
pci 0000:02:00.0: bridge window [mem 0xcf200000-0xcf3fffff]
pci 0000:02:00.0: bridge window [mem 0xcf400000-0xcf5fffff 64bit pref]
pci 0000:02:00.0: no hotplug settings from platform
pci 0000:02:00.0: using default PCI settings
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Haswell HDMI audio: Power for pin 0x5 is now D0
usb 3-6: new high-speed USB device number 5 using xhci_hcd
usb 3-6: New USB device found, idVendor=19d2, idProduct=1353
usb 3-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-6: Product: Android
usb 3-6: Manufacturer: Android
usb 3-6: SerialNumber: ZTE-Blade-G
usb-storage 3-6:1.0: USB Mass Storage device detected
scsi6 : usb-storage 3-6:1.0
usbcore: registered new interface driver usb-storage
scsi 6:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
scsi 6:0:0:1: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:1: Attached scsi generic sg5 type 0
sd 6:0:0:0: [sdd] Attached SCSI removable disk
sd 6:0:0:1: [sde] Attached SCSI removable disk
usb 3-6: USB disconnect, device number 5
usb 3-6: new high-speed USB device number 6 using xhci_hcd
usb 3-6: New USB device found, idVendor=19d2, idProduct=0311
usb 3-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-6: Product: Android
usb 3-6: Manufacturer: Android
usb 3-6: SerialNumber: ZTE-Blade-G
usb 3-6: USB disconnect, device number 6
usb 3-6: new high-speed USB device number 7 using xhci_hcd
usb 3-6: New USB device found, idVendor=19d2, idProduct=1353
usb 3-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-6: Product: Android
usb 3-6: Manufacturer: Android
usb 3-6: SerialNumber: ZTE-Blade-G
usb-storage 3-6:1.0: USB Mass Storage device detected
scsi7 : usb-storage 3-6:1.0
scsi 7:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
scsi 7:0:0:1: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
sd 7:0:0:0: Attached scsi generic sg4 type 0
sd 7:0:0:1: Attached scsi generic sg5 type 0
sd 7:0:0:1: [sde] Attached SCSI removable disk
sd 7:0:0:0: [sdd] Attached SCSI removable disk
sd 7:0:0:0: [sdd] 3131307 512-byte logical blocks: (1.60 GB/1.49 GiB)
sd 7:0:0:0: [sdd] No Caching mode page found
sd 7:0:0:0: [sdd] Assuming drive cache: write through
sd 7:0:0:0: [sdd] No Caching mode page found
sd 7:0:0:0: [sdd] Assuming drive cache: write through
sdd:
FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sd 7:0:0:1: [sde] 7733248 512-byte logical blocks: (3.95 GB/3.68 GiB)
sd 7:0:0:1: [sde] No Caching mode page found
sd 7:0:0:1: [sde] Assuming drive cache: write through
sd 7:0:0:1: [sde] No Caching mode page found
sd 7:0:0:1: [sde] Assuming drive cache: write through
sde: sde1
FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
VFS: busy inodes on changed media or resized disk sdd
sdd: detected capacity change from 1603229184 to 0
sde: detected capacity change from 3959422976 to 0
usb 3-6: USB disconnect, device number 7
usb 3-6: new high-speed USB device number 8 using xhci_hcd
usb 3-6: New USB device found, idVendor=19d2, idProduct=1353
usb 3-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-6: Product: Android
usb 3-6: Manufacturer: Android
usb 3-6: SerialNumber: ZTE-Blade-G
usb-storage 3-6:1.0: USB Mass Storage device detected
scsi8 : usb-storage 3-6:1.0
scsi 8:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
scsi 8:0:0:1: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
sd 8:0:0:0: Attached scsi generic sg4 type 0
sd 8:0:0:1: Attached scsi generic sg5 type 0
sd 8:0:0:1: [sde] Attached SCSI removable disk
sd 8:0:0:0: [sdd] Attached SCSI removable disk
sd 8:0:0:0: [sdd] 3131307 512-byte logical blocks: (1.60 GB/1.49 GiB)
sd 8:0:0:0: [sdd] No Caching mode page found
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sd 8:0:0:0: [sdd] No Caching mode page found
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sdd:
FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sd 8:0:0:1: [sde] 7733248 512-byte logical blocks: (3.95 GB/3.68 GiB)
sd 8:0:0:1: [sde] No Caching mode page found
sd 8:0:0:1: [sde] Assuming drive cache: write through
sd 8:0:0:1: [sde] No Caching mode page found
sd 8:0:0:1: [sde] Assuming drive cache: write through
sde: sde1
usb 3-6: reset high-speed USB device number 8 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022174a240
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022174a200
usb 3-6: reset high-speed USB device number 8 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022174a240
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022174a200
VFS: busy inodes on changed media or resized disk sdd
sd 8:0:0:1: [sde] Device not ready
sd 8:0:0:1: [sde]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:1: [sde]
Sense Key : Not Ready [current]
sd 8:0:0:1: [sde]
Add. Sense: Medium not present
sd 8:0:0:1: [sde] CDB:
Read(10): 28 20 00 00 65 f1 00 00 08 00
end_request: I/O error, dev sde, sector 26097
Buffer I/O error on device sde1, logical block 3262
sd 8:0:0:0: [sdd] Device not ready
sd 8:0:0:0: [sdd]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdd]
Sense Key : Not Ready [current]
sd 8:0:0:0: [sdd]
Add. Sense: Medium not present
sd 8:0:0:0: [sdd] CDB:
Read(10): 28 00 00 00 19 38 00 00 08 00
end_request: I/O error, dev sdd, sector 6456
FAT-fs (sdd): Directory bread(block 6456) failed
FAT-fs (sdd): Directory bread(block 6457) failed
FAT-fs (sdd): Directory bread(block 6458) failed
FAT-fs (sdd): Directory bread(block 6459) failed
FAT-fs (sdd): Directory bread(block 6460) failed
FAT-fs (sdd): Directory bread(block 6461) failed
FAT-fs (sdd): Directory bread(block 6462) failed
FAT-fs (sdd): Directory bread(block 6463) failed
FAT-fs (sdd): FAT read failed (blocknr 32)
FAT-fs (sdd): FAT read failed (blocknr 32)
FAT-fs (sdd): FAT read failed (blocknr 32)
FAT-fs (sdd): FAT read failed (blocknr 32)
sde: detected capacity change from 3959422976 to 0
FAT-fs (sdd): FAT read failed (blocknr 32)
sdd: detected capacity change from 1603229184 to 0
sd 8:0:0:0: [sdd] 3131307 512-byte logical blocks: (1.60 GB/1.49 GiB)
sd 8:0:0:0: [sdd] No Caching mode page found
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sd 8:0:0:0: [sdd] No Caching mode page found
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sdd:
FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sd 8:0:0:1: [sde] 7733248 512-byte logical blocks: (3.95 GB/3.68 GiB)
sd 8:0:0:1: [sde] No Caching mode page found
sd 8:0:0:1: [sde] Assuming drive cache: write through
sd 8:0:0:1: [sde] No Caching mode page found
sd 8:0:0:1: [sde] Assuming drive cache: write through
sde: sde1
FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 7 ep 2 with no TDs queued?
usb 3-6: reset high-speed USB device number 8 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022174a240
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022174a200
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 7 ep 2 with no TDs queued?
usb 3-6: USB disconnect, device number 8
sd 8:0:0:1: [sde] Unhandled error code
sd 8:0:0:1: [sde]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 8:0:0:1: [sde] CDB:
Read(10): 28 20 00 02 7f f9 00 00 90 00
end_request: I/O error, dev sde, sector 163833
sd 8:0:0:1: [sde] Unhandled error code
sd 8:0:0:1: [sde]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 8:0:0:1: [sde] CDB:
Read(10): 28 20 00 02 81 49 00 00 70 00
end_request: I/O error, dev sde, sector 164169
sd 8:0:0:1: [sde] Unhandled error code
sd 8:0:0:1: [sde]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 8:0:0:1: [sde] CDB:
Read(10): 28 20 00 02 81 b9 00 00 f0 00
end_request: I/O error, dev sde, sector 164281
sd 8:0:0:1: [sde] Unhandled error code
sd 8:0:0:1: [sde]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 8:0:0:1: [sde] CDB:
Read(10): 28 20 00 02 82 a9 00 00 10 00
end_request: I/O error, dev sde, sector 164521
sd 8:0:0:1: [sde] Unhandled error code
sd 8:0:0:1: [sde]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 8:0:0:1: [sde] CDB:
Read(10): 28 20 00 02 7f f9 00 00 08 00
end_request: I/O error, dev sde, sector 163833
sd 8:0:0:1: [sde] Unhandled error code
sd 8:0:0:1: [sde]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 8:0:0:1: [sde] CDB:
Read(10): 28 20 00 02 80 01 00 00 08 00
end_request: I/O error, dev sde, sector 163841
VFS: busy inodes on changed media or resized disk sdd
FAT-fs (sde1): Directory bread(block 26096) failed
FAT-fs (sde1): Directory bread(block 26097) failed
FAT-fs (sde1): Directory bread(block 26098) failed
FAT-fs (sde1): Directory bread(block 26099) failed
FAT-fs (sde1): Directory bread(block 26100) failed
FAT-fs (sde1): Directory bread(block 26101) failed
FAT-fs (sde1): Directory bread(block 26102) failed
FAT-fs (sde1): Directory bread(block 26103) failed
FAT-fs (sde1): Directory bread(block 207992) failed
FAT-fs (sde1): Directory bread(block 207993) failed
conftest[4760]: segfault at 0 ip 00000000004005c0 sp 00007fffb6869d30 error 4 in conftest[400000+1000]
conftest[4788]: segfault at 0 ip 00007f786e23dd56 sp 00007fff9dc5c568 error 4 in libc-2.19.so[7f786e0fd000+1bb000]